Use Call Waiting - Nortel 2211 User Manual

Incoming calls

Use Call Waiting

The Call Waiting feature alerts you to an incoming call by producing a tone. It also
puts the current call on hold, while you answer the new call.
To answer an incoming call while on
another call:
+
CallWait
To return to the first telephone call:
+
or
78
4. Dial the DN of the handset that is
ringing (in your call pickup group).
If the pickup DN or group number is
invalid, press the
key.
1. When the incoming call tone sounds,
press the Function
2 key to put the current call on hold.
Note: If Automatic Hold
is not necessary to put the current call on
hold. Begin with step 2.
2. Press the Line
Keys menu.
3. Press the number key corresponding to
the Call Waiting
1. Choose one of the following:
• Press the Function
number 2
on hold.
• Press Power Off/End Call
the second call, then press the
Power On/Start Call
active (idle) state.
Power Off/End Call
key and the number
is enabled, it
key to access the Feature
feature.
key and the
key to put the second call
to end
to enter the