Make And Answer Calls; Make A Call; Answer Calls; Hold Calls - Nortel T7406 Installation Manual

36 Chapter 3 Using the Handset Display Buttons

Make and Answer Calls

This section provides a brief overview of how you use the handset to make and answer calls.

Make a call

Use intercom and extension buttons to make internal calls. See your System Coordinator for a list
of numbers.
To make a call:
1
Press an intercom or line button.
2 After the button lights, enter your system external line access code or line pool access code.
3 Dial a number.
Press ® to end the call.
4

Answer calls

When your telephone rings while you are on a call, you hear a beep tone through the receiver,
unless DND on Busy has been set to Yes in the telephone system programming. In this case, only
the indicator light on your handset will indicate that another call is coming in.
To answer a call:
1
Press the flashing red button.
Press ® to end the call.
2
Note: When the Options list is active, press the flashing red button to answer an
incoming call.

Hold calls

To retrieve a held call, press the button where the call is on hold. Calls are automatically placed on
hold when you switch from one line to another.
To hold a call:
Press ≥ while on a call. The line button flashes.
1
2 Press the flashing button to retrieve a held call.
Press ® to end the call.
3

Mute microphone

To mute the microphone while you are on a call, press the Options button.
P0606142