Revolution 210901 User Manual page 9

agent or similarly qualified person in order to avoid danger
or injury.
• Make sure the cord does not come in contact with sharp or
hot objects and keep it away from open fire. Never pull the
power cord to unplug it from the socket, always pull the plug
instead.
• WARNING! When positioning the appliance, ensure the supply
cord is not trapped or damaged.
• CAUTION! Securely route the power cord if necessary in order
to prevent unintentional pulling, contact with the heating sur-
face or cause a trip hazard.
• Never leave the appliance unattended during use.
• WARNING! As long as the plug is in the socket the appliance
is connected to the power source.
• Turn off the appliance before disconnecting from the mains.
• Connect the power plug to an easily accessible electrical
socket so that in case of emergency the appliance can be un-
plugged immediately.
• Never carry the appliance by the cord.
• Do not use any extra devices that are not supplied together
with the appliance.
• Only connect the appliance to an electrical outlet with the
voltage and frequency mentioned on the appliance label.
• Never use accessories other than those recommended by the
manufacturer. Failure to do so could pose a safety risk to the
user and could damage the appliance. Only use original parts
and accessories.
• This appliance should not be operated by persons with re-
duced physical, sensory or mental capabilities, or persons
that have a lack of experience and knowledge.
• This appliance should, under any circumstances, not be used
by children.
• Keep the appliance and its electrical connections out of reach
of children.
• WARNING! ALWAYS switch off the appliance before cleaning,
maintenance or storage.
• This appliance should be operated by trained personnel in
kitchen of the restaurant, canteens or bar staff, etc.
• Do not place the appliance on a heating object (gasoline, elec-
tric, charcoal cooker, etc.).
• Do not cover the appliance in operation and keep the appli-
ance away from any hot surfaces and open flames. Always
operate the appliance on a horizontal, stable, clean, heat-re-
sistant and dry surface.
• Any repairs shall be carried out only by persons trained or
recommended by the manufacturer.
Special safety instructions
• Close supervision is necessary when any appliance is used
near children.
• When carrying the unit be sure to hold the body with both
hands. Do not carry the unit by the hoppper plate or head.
• Do not fix the cutting blade and cutting plate when using kib-
be attachment.
• Never push products by hand. Use food pusher.
• Do not grind hard food such as bones, nuts, etc.
• Do not grind ginger and other materials with hard fiber.
• Continuous running of meat grinder should be not more than
10 minutes with the following 10minutes interval for motor
cooling.
• Operate the unit from "I" to "REV" or from "REV" to "I" after
the previous working condition stops more than 30 seconds,
or it may cuase some unnormal case such as moving up and
down and easily destroy the unit.
• To avoid jamming, do not force to operate the unit with ex-
cessive pressure.
Intended use
• The device is intended only for grinding boned meat, not fro-
zen, with a positive temperature. Any other use may lead to
damage of the appliance or personal injury.
• Operating the appliance for any other purpose shall be
deemed a misuse of the device. The user shall be solely liable
for improper use of the device.
Grounding installation
This appliance is classified as protection class I and must be
connected to a protective ground. Grounding reduces the risk
of electric shock by providing an escape wire for the electric
current.
This appliance is fitted with a power cord with grounding plug
or electrical connections with grounding wire. The connections
must be properly installed and grounded.
Main parts of the product
(Fig.1 on page 3)
A. Kibbe set
B. Kibbe plate
C. Sausage attachment set
D. Sausage attachment (Large)
E. Sausage attachment (Medium)
F. Sausage attachment (Fine)
G. Cutting plate (Fine)
H. Fix ring
I. Cutting plate (Medium)
J. Cutting plate (Large)
K. Cutting blade
L. Snake
M. Head
N. Head inlet
O. Locker
P. Rotary switch
R. Plug&cord
S. Body
T. Hopper plate
U. Food pusher
Preparation before use
• Remove all protective packaging and wrapping.
• Check to make sure the appliance is undamaged and with
all accessories. In case of incomplete delivery and damages.
Please contact supplier immediately. Do not use the appli-
ance.
• Clean the appliance before use (See == > Cleaning & Main-
tenance).
• Check that voltage indicated on the rating label corresponds
the mains voltage in your home.
• Wash other parts except body(motor housing) in warm soapy
water. Wash all parts (except body) in warm soapy water. Be-
fore plug in (P) make sure the rotary switch in the „OFF" po-
sition.
• Keep the packaging if you intend to store your appliance in
the future.
GB
9