probst EASYCLEAN EC-60 Operating Instructions Manual page 88

Maintenance and care
Clean dirt filter 1x per month
(rinse with water jet, tap out if necessary).
For thread sealing:
As assembly grease:
As oil (for crank operation):
Since limescale deposits are formed when the unit is not used for longer periods of time, it is essential to flush the
lines with low-lime water.
At temperatures around freezing point, it is essential to drain the pump and all water lines completely.
Frozen water can damage the pump and the water lines!
For all maintenance work and
troubleshooting where the unit must be
tilted, the angle of inclination must not
exceed 30°!
51700004
Use Loctite 542 (liquid)
Use lithium saponified, water-resistant grease
Use mineral engine oil 15W40
15 / 18
Dirt trap
(Filter sieve)
GB