Working With Lance/High-Pressure And Low-Pressure Nozzle - probst EASYCLEAN EC-60 Operating Instructions Manual

Operation
3. Start engine
•
Set start lever to ON (Fig. 2)
•
Open fuel cock (picture 3)
•
- Activate choke (picture 3)
4. If necessary, open cross-flushing (open/open).
(Dirt is thereby flushed away to the right) Fig. 4
5.
The speed of rotation of the motor and the feed rate of the (EC-60) must be adjusted and optimized depending
on the degree of contamination of the surface.
5.2

Working with lance/high-pressure and low-pressure nozzle

When working additionally with a lance, the
gun must [absolutely] be actuated before or
during the starting process of the motor, so
that [no counterpressure] occurs! (Fig. 6)
Connection of the suction hose
for the admixture of cleaning agents
Connection of the high pressure hose for
lance operation
High pressure hose (lance operation) Image
5a ➔
Suction hose (cleaning agent) Image 5b ➔
51700004
Fig 2
Cross-flushing
Start lever
Bild 5
12 / 18
Speed control
Choke
Fuel tap
Fig 3
Fig 4
Bild 5a
Bild 5b
GB