probst EASYCLEAN EC-60 Operating Instructions Manual page 130

2.2 APPLIcATIONS

cAuTION
•
Protect the moving parts with suitable guards. Pay special attention to the pulley
applications.
•
The pump must not work at a rotation speed that is higher than the one indicated on the
relevant plate (see also what described in paragraph "F
• The pump must be fixed firmly to the motor flange or on a stable base by means of the
(optional) feet.
Male Female
shaft shaft
Ø 24 Ø 24
mm mm
LW • •
LW-K • •
LWS •
LWS-K •
LWR • •
LWR-K • •
LWD •
LWD-K •
FW •
FWS •
FWD
ZWD
ZW-K •
ZWD-K
HW •
HWS •
HWD
TWN •
TW •
TWS •
AXD
SW •
SWS •
The various available applications for the pumps described in this manual are summarised in the
following table.
Apply always to the dealer or to the Producer to identify the correct application. The pump
applications must be carried out by following the good rules of mechanics. The Technical Service
supplied by the Producer is at the installer disposal for any necessary information.
The pump can rotate both in clockwise and in counter-clockwise direction.
Female Female Female
shaft shaft shaft
Ø 5/8" Ø 3/4" Ø 18
mm
• •
•
• • •
• •
•
• •
eatures and technical data
Female Female Female
shaft shaft shaft
Ø 20 Ø 28 Ø 1"
mm mm 1/8
•
•
•
•
•
".
Female Female Hydraulic
shaft shaft motor
Ø 25 Ø 1"
mm
•
•
•
•
•
•
• •
37