probst EASYCLEAN EC-60 Operating Instructions Manual page 117

This manual is made up of two separate parts.
The first one is directed to final user and Skilled Engineer, while the second is only for the
Skilled Engineer.
By Skilled Engineer we mean:
•
The producer of the machine (for instance of the motor pump) with built-in pump (from now
on, by "machine with built-in pump" we also mean a "system with built-in pump", like for
instance in the case of a pumping station);
•
A person of the Authorised Service Centre, who has been especially trained and authorised
by the producer to carry out extraordinary maintenance interventions and repairs on the
equipment. The interventions on the electrical parts must be carried out by a Skilled Engineer
that is also a Qualified Electrician, that is to say a person who is professionally enabled and
trained to check, install and repair electrical devices to the "state-of-the-art" and according to
the rules valid in the country in which the device is installed.
1. GENERAL INFORMATION
We congratulate with you for choosing one of our products and would like to remind you that this
product has been manufactured by paying the maximum attention to operators' safety, its work
efficiency and the environmental protection.
In order to preserve these features in time, we recommend to carefully read this manual and invite
you to observe what described in it.
Special attention must be paid to the reading of the text parts marked by the symbol:
because they contain important safety instructions for the pump use.
The producer refuses any responsibility for:
•
lack of compliance with what contained in this manual;
•
different uses of the pump than the one mentioned in the paragraph "INTENDED uSE";
•
use contrary to specific current regulations;
•
incorrect installation;
•
serious failings in the recommended maintenance;
•
modifications or interventions non authorised by the Producer;
•
use of non-original spare parts or parts that are not specific for the pump model;
•
repairs not carried out by a Skilled Technician.
1.1 GuARANTEE cONDITIONS
The guarantee is valid for 24 months starting from the date indicated on the fiscal sales document
(fiscal bill, invoice, etc.), provided that the guarantee certificate attached to the documentation of
the pump is returned to the Producer, after having been completely filled-in, within 10 days from
the purchase date.
The buyer has only the right to the replacement of the parts that, according to the Producer or
one of its authorised representatives, shows defects in terms of material or production, with the
exclusion of any right to reimbursements of any direct or indirect damage of any nature. The
labour, packaging and transport costs are to be borne by the buyer.
24
FOREWORD
FIRST PART

cAuTION