Deleting A Layer 2 Classifier Element Configuration; Configuring System Classifier Element; Nortel Ethernet Routing Switch 4500 Series - Nortel 4524GT Configuration

106 Chapter 3 Configuring Quality of Service (QoS) with the Web-based Management Interface
3
Deleting a layer 2 classifier element configuration
To delete a layer 2 classifier element configuration:
Step
1
2
3
Configuring System Classifier Element
The System Classifier Element supports traffic identification which is based
on Layer 2 destination MAC address type. The benefits offered by System
Classifier Element are:
•
Copyright © 2007, Nortel Networks
.
Field
EtherType
802.1p Priority
Session ID
Click Submit.
The new Layer 2 Classifier Element is displayed in Layer2 Classifier
Element Table.
Action
Open the Layer2 Classifier Element screen by selecting
Applications > QoS > QoS Advanced > Rules > Layer2 Classifier
Element from the menu. This screen is illustrated in
Classifier Element screen" (page
In the Layer2 Classifier Element Table, click the Delete icon in the
row of the classifier element to be deleted.
A message opens prompting for confirmation of the request. Click
Yes.
A Layer 2 classifier element configuration cannot be modified. The
configuration must be deleted and recreated.
A Layer 2 classifier element that is referenced by a classifier or classifier
block cannot be deleted.
Supports pattern matching or offset filtering capabilities.

Nortel Ethernet Routing Switch 4500 Series

Configuration — Quality of Service
NN47205-504 (322816-B)
5.1 23 November 2007
Description
The type of ethernet protocol the classifier uses.
The 802.1p priority level this classifier uses.
Specify the session ID.
—End—
105).
ATTENTION
—End—
03.01 Standard
"Layer2