No Qos L2-Element Command; Qos Classifier Command; Nortel Ethernet Routing Switch 4500 Series - Nortel 4524GT Configuration

Parameter
ethertype <etype>
priority <ieee1p-seq>
The qos l2-element command is executed in the Global Configuration
command mode.
A Layer 2 element referenced in a classifier cannot be deleted.

no qos l2-element command

The no qos l2-element command deletes Layer 2 element entries.
The syntax for the no qos l2-element command is
no qos l2-element
Substitute <1-55000> above with the ID of the element to be deleted.
The no qos l2-element command is executed in the Global
Configuration command mode.
qos classifier command
The qos classifier command facilitates the linking of individual IP and
L2 classifier elements into a single classifier.
The syntax for the qos classifier command is
qos classifier
<WORD>] element-type {ip | l2 | system} element-id
<1-55000> [session-id <1-4294967295>]
"qos classifier parameters" (page 60)
command.
Copyright © 2007, Nortel Networks
.
Configuring QoS Elements, Classifiers, and Classifier Blocks 59
ATTENTION
<1-55000>
<1-55000>

Nortel Ethernet Routing Switch 4500 Series

Configuration — Quality of Service
NN47205-504 (322816-B)
5.1 23 November 2007
Description
Enter the Ethernet type in the form of 0xXXXX,
for example, 0x0801.
Default is ignore.
Enter the 802.1p priority values; range from 0
to 7 or all.
Default is ignore.
set-id <1-55000> [name
outlines the parameters for this
03.01 Standard