Configuration - Quality Of Service; Nortel Ethernet Routing Switch 4500 Series - Nortel 4524GT Configuration

40 Chapter 2 Configuring Quality of Service (QoS) with the CLI
l2-element [user | system | all | <1-65535>] |
classifier [user | system | all | <1-65535>] |
classifier-block [user | system | all | <1-65535> ] |
action [user | system | all] |
if-action-extension [user | system | all | <1-65535>] |
meter [user | system | all | <1-65535>] |
if-shaper [port <portlist>]|
policy [user | system | all | <1-65535>] |
agent |
diag [mask | resource] |
ip-acl <1 - 65535> |
l2-acl <1 - 65535> |
capability [meter | shaper] [port <portlist>]]
nsna [classifier | interface | name ]
"show qos parameters" (page 40)
show qos parameters
Parameter
acl-assign <1 - 65535>
if-group
if-assign [port <portlist>]
queue-set
queue-set-assignment
ingressmap
egressmap [ds <0-63> |
status]
Copyright © 2007, Nortel Networks
.
Description
Displays the specified access list assignment
entry.
Displays the interface groups.
Displays the list of interface assignments.
Displays the queue set configuration.
Displays the association between the 802.1p
priority to that of a specific queue.
Displays the 802.1p priority to DSCP mapping.
Displays the association between the DSCP and
the 802.1p priority and drop precedence.

Nortel Ethernet Routing Switch 4500 Series

Configuration — Quality of Service
NN47205-504 (322816-B)
5.1 23 November 2007
outlines the parameters for this command.
03.01 Standard