Assa Abloy Conrbin Russwin IN120 WiFi Installation Instructions Manual page 17

IN120 & IN220 Series
Cylindrical Lock
8 Lock Installation (Continued)
9 Install Outside Reader
a. Orient the reader so the LED lens is at the top.
b. Feed the reader harness through the door (from outside to inside).
c. Install the reader to the outside of door by aligning the mounting posts with the door
preparation holes. Hold the reader flush against door while ensuring proper alignment.
Copyright © 2016, 2019, 2021, ASSA ABLOY Access and Egress Hardware Group, Inc.
All rights reserved. Reproduction in whole or in part without the express written
permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
LED
Reader Assembly
with Harness
Outside Face
of Door
Fig. 9
17