Assa Abloy Corbin Russwin CLX3361 Installation Instructions Manual

Installation Instructions
Installation Instructions
CLX3300 Cylindrical Lockset
Tools Required
1
• #2 Phillips screwdriver
Product Components
2
11
9
12
16
Door Preparation
3
1. Use template FM567 to mark the door (See Figure 1).
2. Drill the door according to the template.
3. Verify the dimensions (See Figure 2).
4. Install the strike (See Figure 3)
Template
Backset must
match latch
Desired
height
above
DOOR
floor
FRAME
Figure 1
IMPORTANT
• The accuracy of door preparation is critical for proper functioning and security of this lever handle lock. Misalignment can
cause premature wear and a lessening of security.
• Be sure to verify backset before marking and drilling door.
For installation assistance contact Corbin Russwin:
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com •www.corbinrusswin.com.
Pour le français, visiter: www.corbinrusswin.com/en/library/installation-instructions.
Copyright © 2021, 2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
• Lever release tool (provided)
10
2
8
7
15
13
3
14
1" (25mm)
hole
2-1/4"
(57mm)
Door bevel
1-1/8"
(29mm)
Figure 2
• 5/16" drill bit
6
4
5
5/16" (8mm) hole
2-3/4"
(70 mm)
2-1/8"
(54mm)
hole
5/32" (4mm)
• 5/32" drill bit
• 1/8" drill bit
Fig. Description
1 Inside lever handle
2 Rose/Scalp (2)
3 Screws - latch (2) #8-32 x 3/4"
4 Inside spring housing assembly
Screws - through-bolt (2) #12-24
5
x 1-1/2"
6 Lockbody assembly with rose liner
7 Outside spring housing assembly
8 Cylinder spacer
9 Cylinder
10 Outside lever handle
11 Key
12 Lever release tool
13 Latch
14 Screws - strike (2) #12-24 x 1"
15 Strike
2
16 Strike box (Optional)
1
Strike Box
Attaching Screws
#12 -24 x 1"
FM566-EN 6/22
Strike Box
Attaching Screws
#8 -32 x 3/4"
Figure 3