Data Loss - DIGITIZE DDI-11E Installation & User Manual

Operation
The fourth line of the display will read "SEE PRINTOUT" and an audible Trouble
buzzer will sound. To silence the buzzer the operator must press "CLEAR".
The following message will print when the first dialer is missed:
In addition, the following message will print for each missed dialer:
The dialer report will list all of the dialers that have failed to report within the 24 Hour
period. To obtain the dialer report, press SHIFT (
message will print:
Missed dialer messages will not appear on the screen or on the thermal printer while
the operator is in the SET menu (i.e. adding new customer numbers). When the
operator has pressed CLEAR twice and exited Dialer Set-Up, the error message will
appear on the screen, the buzzer will sound and the error message will be printed.

5.3 Data Loss

Some dialers provide a data loss feature. If the dialer was not successful in an
attempt to call in, it will give up. The next time it successfully makes a connection
will result in a 'Data Loss' message on the SYSTEM 3505. The following message
will print:
After processing a data loss, this incoming signal will produce a Daily Test message
as well.
700289-0001 Rev. B 10/21
CHECK DIALER REPORT
30-MAR-13 08:30:24
FAIL 24HR,CUST ZZZZZZ
30-MAR-13 08:30:24
** MISSED DIALERS **
30-MAR-13 08-30-24
MISSED DD ZZZZZZ
MISSED DD ZZZZZZ
MISSED DD ZZZZZZ
MISSED DD ZZZZZZ
END DIALER REPORT
THIS IS THE FIRST
CONNECTION SINCE
AN UNSUCCESSFUL
CONNECTION ATTEMPT.
Digitize Inc.
) and REPORT. The following
5-3