Setting up the System
4.4.2 Set English Equivalents
At the ZONE/ENGLISH EQUIV. Screen, Enter 2 (ENGLISH EQUIV.) and the display
will read:
Pressing the PRINT button will print the Alarm Code table and the English
Equivalent (Process : For) table.
Warning!!
SYSTEM 3505 will only recognize the first occurrence of the code. It
is strongly recommended that you print the Configuration Table and
thoroughly check for any code repetitions
If a mistake is made while entering data, use the - key to back up and reenter the
data. To make the field blank, press the shift button and then the F button (No. 6 on
keypad) and then repeat the procedure to enter the next 'F'. Typing 'FF' returns the
field to a blank line. The shift button must be pressed each time, it does not lock into
place.
4-6
Never duplicate codes within a Configuration.
Digitize Inc.
The
700289-0001 Rev. B 10/21
Need help?
Do you have a question about the DDI-11E and is the answer not in the manual?