5.0 Connect the G.SHDSL port
1.
Obtain single-twisted-pair cable with an RJ-11 plug connector at each end.
2.
Plug one end of the cable into the RJ-11socket (yellow colored port labeled LINE) on the
DiamondLink Router.
Plug the other end of the cable into the RJ-11 wall socket that provides your G.SHDSL service.
3.
When a DSL link is established, the front panel WAN Link LED will turn on.
4.
For detailed information about configuring and operating guidance, set up procedures, and troubleshooting,
refer to the DiamondLink 3201 & 3241 User Manual available online at
3201.pdf.
A.0 Customer and Technical Support
Toll-Free VoIP support: call
Online support:
www.patton.com
E-mail support: support@patton.com—answered within 1 business day
Telephone support:
Standard: +1 (301) 975-1007 (USA), Monday–Friday: 8:00 am to 5:00 pm EST (1300 to
•
2200 UTC/GMT)
Alternate: +41 (0)31 985 25 55 (Switzerland), Monday–Friday: 8:00 am to 5:00 pm CET (0900 to 1800
•
UTC/GMT)
Fax:
+1 (253) 663-5693
6
6.0 Additional Information
sip:support@patton.com
(USA)
or +41 (0)31 985 25 26
www.patton.com/manuals/
with a VoIP SIP phone
(Switzerland)
DiamondLink 3201 & 3241 Quick Start Guide