DeWalt XR DCC1018 Original Instructions Manual page 34

EnGLIsH
Batteries
Cat # V Ah
DC
DCB546 18/54 6.0/2.0
DCB547 18/54 9.0/3.0
DCB548 18/54 12.0/4.0
DCB549 18/54 15.0/5.0
DCB181 18 1.5
DCB182 18 4.0
DCB183/B/G 18 2.0
DCB184/B/G 18 5.0
DCB185 18 1.3
DCB187 18 3.0
DCB189 18 4.0
DCBP034 18 1.7
*Date code 201811475B or later
**Date code 201536 or later
***Battery charge times matrix provided for guidance only; charge times will vary depending on temperature and condition of batteries.
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
18V 10L Cordless Air Compressor
DCC1018
Dewalt declares that these products described under "technical
data" are in compliance with:
The Supply of Machinery (Safety) Regulations 2008, S.I.
2008/1597 (as amended).
EN1012-1:2010, EN 62841-1:2015
The Noise Emission in the Environment by Equipment for use
Outdoors Regulations 2001, S.I. 2001/1701 (as amended),
Compressors, <15kW, Schedule 9.
Intertek Testing & Certification Ltd, Academy Place, 1-9 Brook
Street, Brentwood, Essex, CM14 5NQ, United Kingdom
Approved Body Number: 0359
LWA (measured sound power level)
LWA (guaranteed sound power level)
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact Dewalt at the following
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Dewalt.
32
Weight (kg) DCB104 DCB107 DCB112 DCB113 DCB115
1.08 60 270
1.46 75* 420
1.46 120 540
2.12 125 730
0.35 22 70
0.61 60/40** 185
0.40 30 90
0.62 75/50** 240
0.35 22 60
0.54 45 140
0.54 60 185
0.32 27 82
dB
dB
Chargers/Charge Times (Minutes)***
170 140 90
270 220 135*
350 300 180
450 380 230
45 35 22
120 100 60
60 50 30
150 120 75
40 30 22
90 70 45
120 100 60
50 40 27
Karl Evans
Vice President Professional Power Tools EANZ GTS
270 Bath Road, Slough
SL1 4DX
England
06.05.2022
a
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
92
which, if not avoided, may result in minor or
93
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
GENERAL POWER TOOL SAFETY WARNINGS

WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
DCB116 DCB117 DCB118 DCB132 DCB119
80 40 60
110* 60 75*
150 80 120
170 90 125
22 22 22
60/45** 60/40** 60/40**
30 30 30
75/60** 75/50** 75/50**
22 22 22
45 45 45
60 60 60
27 27 27
90 X
135* X
180 X
230 X
22 45
60 120
30 60
75 150
22 40
45 90
60 120
27 50