DeWalt XR DCC1018 Original Instructions Manual page 33

18V 10L CORDLESS AIR COMPRESSOR
DCC1018
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Air tank capacity
Approximate cut‑in pressure
Approximate cut‑out pressure
Air displacement
Air delivery at 7 BAR
Fuse type
Regulated pressure rating
(approximate)
Motor revolutions per minute
Quick connect type
Pump type
Weight (without battery pack)
Noise valuesaccording to EN1012‑1 (EN ISO 2151:2008)
L (emission sound pressure level)
PA
K (uncertainty for the given sound level)
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with a
standardised test given in EN1012-1 (EN ISO 2151:2008) and
may be used to compare one tool with another. It may be used
for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
WALT one of the
e
DCC1018
V 18
DC
1
Li‑Ion
Liters 10
BAR 6.9
18V
BAR 8.6
battery
pack:
18V/54V
BAR 9.6
battery
pack:
l/min 48
l/min 31
Time delay
18V
BAR 0–8.6
battery
pack:
18V/54V
BAR 0–9.6
battery
pack:
3400
Universal EU 1/4"
quick coupling
Oil‑less
kg 11.3
dB(A) 79,1
dB(A) 0,9
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
EC‑Declaration of Conformity
Machinery Directive
18V 10L Cordless Air Compressor
DCC1018
Dewalt declares that these products described under "technical
data" are in compliance with:
EC Directives 2006/42/EC, EN1012-1:2010, EN 62841-1:2015.
2000/14/EC, Compressors, <15kW, Annex VI
DEKRA Testing and Certification GmbH, Handwerkstraße 15,
70565 Stuttgart.
Location Certification Body, Dinnendahlstr. 9, 44809 Bochum,
Germany
Notified Body number: 0158
LWA (measured sound power level)
LWA (guaranteed sound power level)
These products also comply with Directive 2014/30/EU and
2011/65/EU.
For more information, please contact Dewalt at the following
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice-President Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
65510, Idstein, Germany
06.05.2022
EnGLIsH
dB 92
dB 93
WALT.
e
31