Supported Networking Standards; Operating Environment; Mechanical Specifications; Dimension Drawings - Siemens SIMATIC NET RUGGEDCOM RMC40 Installation Manual

4.4

Supported Networking Standards

4.5

Operating Environment

The RUGGEDCOM RMC40 is rated to operate under the following environmental
conditions.
Ambient Operating
Temperature
Ambient Storage Temperature
Ambient Relative Humidity
Maximum Altitude
a
Typical. May change based on which fiber optic transceivers are installed. For more information, refer to
Specifications" (Page
b
Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.
c
Non-condensing.
4.6

Mechanical Specifications

Weight
Ingress Protection
Enclosure
4.7

Dimension Drawings

Note
All dimensions are in millimeters, unless otherwise stated.
RUGGEDCOM RMC40
Installation Manual, 11/2022, C79000-G8976-1009-10
Parameter 10Base-FL
IEEE 802.3 Yes
IEEE 802.3u
IEEE 802.3x Yes
ab
c
18).
0.68 kg (1.5 lbs)
IP30
21 AWG Galvanized Steel
100Base-FX
Yes
Yes
-40 to 80 °C (-40 to 176 °F)
-40 to 85 °C (-40 to 185 °F)
5% to 95%
2000 m (6562 ft)
Technical Specifications
4.4 Supported Networking Standards
Notes
10Base-T
100Base-TX/100Base-FX
Full Duplex, Flow Control
"Fiber Optic Ethernet Port
19