5.1.9 Rohs; Other Approvals; Emc And Environmental Type Tests - Siemens SIMATIC NET RUGGEDCOM RMC40 Installation Manual

Certification
5.1.9 RoHS
5.1.9 RoHS
This device is declared by Siemens Canada Ltd. to meet the requirements of the
following RoHS (Restriction of Hazardous Substances) directives for the restricted use
of certain hazardous substances in electrical and electronic equipment:
•
A copy of the Material Declaration is available online at
support.industry.siemens.com/cs/ww/en/view/109738831.
5.1.10

Other Approvals

This device meets the requirements of the following additional standards:
•
•
5.2

EMC and Environmental Type Tests

The RUGGEDCOM RMC40 has passed the following EMC and environmental tests.
IEC 61850-3 Type Tests
61000-4-2
61000-4-3
61000-4-4
61000-4-5
24
China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic
Information Products
IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications
Networking Devices in Electric Power Substations
IEC 61850-3
Communications Networks and Systems for Power Utility Automation – Part 3:
General Requirements
Test
IEC ESD
IEC Radiated RFI
IEC Burst (Fast Transient)
IEC Surge
Description
Enclosure
Contact
Enclosure Air
Enclosure
Ports
Signal Ports
DC Power
Ports
AC Power
Ports
Earth
Ground Ports
Signal Ports
https://
Test Levels
± 8 kV
± 15 kV
20 V/m
± 4 kV @ 2.5 kHz
± 4 kV
± 4 kV
± 4 kV
± 4 kV Line-to-Earth,
± 2 kV Line-to-Line
RUGGEDCOM RMC40
Installation Manual, 11/2022, C79000-G8976-1009-10
Severity
Levels
4
4
a
Note
a
Note
4
4
4
4