Table of Contents
Advertisement
1
2
3
4
5
6
Figure 1.1
POWER LED
LINK/ACT LED
Power Supply Terminal
Communication Ports
1.3
Required Tools and Materials
The following tools and materials are required to install the RUGGEDCOM RMC40:
AC or DC power cord (16 AWG)
RUGGEDCOM RMC40
Installation Manual, 11/2022, C79000-G8976-1009-10
1
2
POWER LED
Copper Ethernet Port with LEDs
Fiber Optic Ethernet Port (ST Port Shown)
LINK/ACT LED
Power Terminal Block
Chassis Ground Terminal
RUGGEDCOM RMC40
Tools/Materials
4
3
Illuminates when power is being supplied to the device.
State
Green
Off
Indicate the connection status of the fiber optic Ethernet ports.
State
Yellow (Solid)
Yellow (Blinking)
A pluggable terminal. For more information, refer to:
•
"Connecting Power" (Page 9)
•
"Power Supply Specifications" (Page 17)
Receive and transmit data. For more information about the
various ports available for the RUGGEDCOM RMC40, refer to
"Communication Ports" (Page
For connecting power to the device.
1.3 Required Tools and Materials
5
Description
Power is on
Power is off
Description
Link is established
Port activity
13).
Purpose
Introduction
6
3
Advertisement
Table of Contents
