Fiber Optic Ethernet Ports - Siemens SIMATIC NET RUGGEDCOM RMC40 Installation Manual

3.2

Fiber Optic Ethernet Ports

Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer
Registered Jack), LC (Lucent Connector), SC (Standard or Subscriber Connector) or ST
(Straight Tip) connectors. Make sure the Transmit (Tx) and Receive (Rx) connections
of each port are properly connected and matched to establish a proper link.
Available Ports
1
1
2
Figure 3.3
1
1
2
Figure 3.5
Specifications
For specifications on the available fiber optic Ethernet ports, refer to
Ethernet Port Specifications" (Page
RUGGEDCOM RMC40
Installation Manual, 11/2022, C79000-G8976-1009-10
2
Tx Connector
Rx Connector
MTRJ Port
Tx Connector
Rx Connector
SC Port
3.2 Fiber Optic Ethernet Ports
1
Tx Connector
1
Rx Connector
2
Figure 3.4
2
1
Tx Connector
1
Rx Connector
2
Figure 3.6
18).
Communication Ports
2
LC Port
2
ST Port
"Fiber Optic
15