Related Manuals for Siemens RUGGEDCOM RP110
Summary of Contents for Siemens RUGGEDCOM RP110
- Page 1 Installation Manual SIMATIC NET Rugged Ethernet Switches RUGGEDCOM RP110 Edition 01/2021 https://www.siemens.com...
- Page 2 Preface Introduction Installing the Device SIMATIC NET Device Management Rugged Ethernet Switches RUGGEDCOM RP110 Communication Ports Technical Specifications Installation Manual Certification 01/2021 C79000-G8976-1012-04...
- Page 3 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
-
Page 4: Table Of Contents
Accessing Documentation ....................... v Registered Trademarks ......................v Warranty ..........................v Training ..........................vi Customer Support ........................vi Contacting Siemens ....................... vii Introduction ........................... 1 Feature Highlights ....................1 Description ......................2 Required Tools and Materials ................. 3 Decommissioning and Disposal ................4 Cabling Recommendations .................. - Page 5 European Union ....................25 6.1.3 FCC ........................26 6.1.4 ISED ........................26 6.1.5 ISO ........................26 6.1.6 ACMA ........................27 6.1.7 RoHS ........................27 6.1.8 Other Approvals ....................27 EMC and Environmental Type Tests ..............28 RUGGEDCOM RP110 Installation Manual, 01/2021, C79000-G8976-1012-04...
-
Page 6: Preface
Warranty Siemens warrants this product for a period of five (5) years from the date of purchase, conditional upon the return to factory for maintenance during the warranty term. This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void. -
Page 7: Training
Siemens Sales representative. Customer Support Customer support is available 24 hours, 7 days a week for all Siemens customers. For technical support or general information, contact Siemens Customer Support through any of the following methods: Online Visit http://www.siemens.com/automation/support-request... -
Page 8: Contacting Siemens
Preface Contacting Siemens • Ask questions or share knowledge with fellow Siemens customers and the support community Contacting Siemens Address Siemens AG Industry Sector 300 Applewood Crescent Concord, Ontario Canada, L4K 5C7 Telephone Toll-free: 1 888 264 0006 Tel: +1 905 856 5288... - Page 9 Preface Contacting Siemens viii RUGGEDCOM RP110 Installation Manual, 01/2021, C79000-G8976-1012-04...
-
Page 10: Introduction
In addition to a power injector, the RUGGEDCOM RP110 has a built in serial server, designed to bridge legacy serial devices on to an IP network. It offers a single interface capable of supporting RS422, 485 and 232 protocols, and is protocol aware for certain common serial protocols such as DNP and Modbus. -
Page 11: Description
RM version for connection to RUGGEDCOM WIN5000 Series devices • Rated up to 12 W Description The RUGGEDCOM RP110 features various ports, controls and indicator LEDs on the front panel for connecting, configuring and troubleshooting the device. RUGGEDCOM RP110 Installation Manual, 01/2021, C79000-G8976-1012-04... -
Page 12: Required Tools And Materials
For information about grounding the device, refer to "Grounding the Device (Page 8)". Required Tools and Materials The following tools and materials are required to install the RUGGEDCOM RP110: Tools/Materials Purpose AC or DC power cord (16 AWG) For connecting power to the device. -
Page 13: Decommissioning And Disposal
Siemens also does not recommend using copper Ethernet ports to interface with devices in the field across distances that could produce high levels of ground potential rise (i.e. greater than 2500 V), during line-to-ground fault conditions. -
Page 14: Installing The Device
This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void. Changes or modifications not expressly approved by Siemens AG could invalidate specifications, test results, and agency approvals, and void the user's authority to operate the equipment. -
Page 15: Unpacking The Device
If any item is missing or damaged, contact Siemens for assistance. Installing the Device Outdoors When installing the RUGGEDCOM RP110 outdoors, make sure there is a solid connection between the lightning protector and the CPE/PD. The following illustration details a typical installation:... -
Page 16: Mounting The Device
Typical Outdoor Installation Mounting the Device The RUGGEDCOM RP110 can be equipped with DIN rail adapters pre-installed on each side of the chassis. The adapters allow the device to be slid onto a standard 35 mm (1.4 in) DIN rail. -
Page 17: Grounding The Device
The user is responsible for the operating environment of the device, including maintaining the integrity of all protective conductor connections and checking equipment ratings. Make sure to review all operating and installation instructions before commissioning or performing maintenance on the device. RUGGEDCOM RP110 Installation Manual, 01/2021, C79000-G8976-1012-04... -
Page 18: Connecting Power
#6 Ring Lug Figure 2.3 Chassis Ground Connection Connecting Power The RUGGEDCOM RP110 supports a single high AC or low DC power supply. The RUGGEDCOM RP110 is equipped with a screw-type terminal block, which provides power to the AC/DC power supply. Note •... - Page 19 Connect the ground terminal on the power source to the chassis ground terminal on the device. For more information, refer to "Grounding the Device (Page 8)". RUGGEDCOM RP110 Installation Manual, 01/2021, C79000-G8976-1012-04...
-
Page 20: 2.6.2 Connecting Low Dc Power
Connect the ground terminal on the power source to the chassis ground terminal on the device. For more information, refer to "Grounding the Device (Page 8)". RUGGEDCOM RP110 Installation Manual, 01/2021, C79000-G8976-1012-04... - Page 21 Installing the Device 2.6.2 Connecting Low DC Power RUGGEDCOM RP110 Installation Manual, 01/2021, C79000-G8976-1012-04...
-
Page 22: Device Management
The RUGGEDCOM RP110 is designed to be a Power-over-Ethernet (POE) injector for RUGGEDCOM WIN5000 series subscriber stations. IMPORTANT If the RUGGEDCOM RP110 is to be installed outdoors, make sure the connection between both devices is bridged by a suitably rated lightening protector. For more information, refer to "Installing the Device Outdoors (Page... - Page 23 Device Management 3.2 Configuring the Device RUGGEDCOM RP110 Installation Manual, 01/2021, C79000-G8976-1012-04...
-
Page 24: Communication Ports
Communication Ports The RUGGEDCOM RP110 comes equipped with a standard BNC port for IRIG-B out, an RS232/RS422/RS485 pluggable terminal for serial connections, and a 10Base-T copper Ethernet port for connection with RUGGEDCOM WIN5000 Series devices. RS232/RS422/RS485 Serial Terminal BNC Port Copper Ethernet Port Figure 4.1... -
Page 25: 4.1.1 Rs232 Data Ports
Transmit (Tx), Receive (Rx) and Common (COM). IMPORTANT The RS232 port is intended for point-to-point applications only. In adherence to the EIA/TIA guidelines for RS232 communications, the following is recommended by Siemens: • Always use shielded cabling to minimize the effects of ambient electrical noise •... -
Page 26: 4.1.2 Rs485/422 Data Ports
The serial terminal includes a single RS485/RS422 data port. In half duplex mode, the RS485 connections (Rx+, Rx-, COM) should be connected. In full-duplex mode, the RS422 connections (Rx+, Rx-, Tx+, Tx-, COM) should be connected. Both RS485 RUGGEDCOM RP110 Installation Manual, 01/2021, C79000-G8976-1012-04... - Page 27 120 Ohm resistor and a 10nF capacitor in series across the twisted pair). Note Transient protection is provided on all RUGGEDCOM RP110 terminals. Lightning strikes and ground surge currents can cause large momentary voltage differences between ends of communication links. To ensure maximum reliability of the entire link, all equipment should have similar transient protection installed.
-
Page 28: Copper Ethernet Port
Recommended RS485 Wiring Copper Ethernet Port The RUGGEDCOM RP110 supports a single 10Base-TX copper Ethernet port that allows connection to a standard Category 5 (CAT-5) unshielded twisted-pair (UTP) cables with an RJ-45 male connector. The RJ-45 receptacle is directly connected to the chassis ground on the device and can accept CAT-5 shielded twisted-pair (STP) cables. -
Page 29: Bnc Port
BNC Port This port supports the IRIG-B PWM, PPS and PPx signal formats. Enabling/disabling the port and selecting the signal format is controlled through the RUGGEDCOM RP110 operating system. The number of devices that can be connected to the port is dependent on the cabling type and length, as well as the input impedances of the devices. - Page 30 (VL) the connected devices see is greater than the minimum required voltage. Inputs are controlled by RUGGEDCOM RP110 and only one can be active at any time. For information about activating an input, refer to the RUGGEDCOM ROS Configuration Manual for the RUGGEDCOM RP110.
- Page 31 Communication Ports 4.3 BNC Port RUGGEDCOM RP110 Installation Manual, 01/2021, C79000-G8976-1012-04...
-
Page 32: Technical Specifications
52 VDC, 12 W @ 55 °C (131 °F), 10 W @ 75 °C (167 °F) 125/250 VDC Operating Environment The RUGGEDCOM RP110 is rated to operate under the following environmental conditions. Ambient Operating -40 to 85 °C (-40 to 185 °F) -
Page 33: Dimension Drawings
Technical Specifications 5.4 Dimension Drawings Dimension Drawings Note All dimensions are in millimeters, unless otherwise stated. 77.2 56.6 11.4 95.0 Figure 5.1 Overall Dimensions RUGGEDCOM RP110 Installation Manual, 01/2021, C79000-G8976-1012-04... -
Page 34: Certification
UL 62368-1 Information Technology Equipment – Safety – Part 1: General Requirements) 6.1.2 European Union This device is declared by Siemens AG to comply with essential requirements and other relevant provisions of the following EU directives: • EN 62368-1 Information Technology Equipment – Safety – Part 1: General Requirements •... -
Page 35: 6.1.3 Fcc
Products with Respect to the Restriction of Hazardous Substances The device is marked with a CE marking and can be used throughout the European community. A copy of the CE Declaration of Conformity is available from Siemens AG. For contact information, refer to "Contacting Siemens (Page vii)". -
Page 36: Acma
A copy of the Declaration of Conformity is available via Siemens Industry Online Support at https://support.industry.siemens.com/cs/ww/en/view/89855782. 6.1.7 RoHS This device is declared by Siemens AG to meet the requirements of the following RoHS (Restriction of Hazardous Substances) directives for the restricted use of certain hazardous substances in electrical and electronic equipment: •... -
Page 37: Emc And Environmental Type Tests
Certification 6.2 EMC and Environmental Type Tests EMC and Environmental Type Tests The RUGGEDCOM RP110 has passed the following EMC and environmental tests. IEC 61850-3 Type Tests Test Description Test Levels Severity Levels Enclosure ± 8 kV 61000-4-2 Contact Enclosure Air ±... - Page 38 Ports Shielded cable used. IEEE 1613 EMC Immunity Type Tests Note The RUGGEDCOM RP110 meets Class 2 requirements for an all-fiber configuration and Class 1 requirements for copper ports. Description Test Levels Enclosure Contact ± 2 kV, ± 4 kV, ± 8 kV Enclosure Air ±...
- Page 39 Certification 6.2 EMC and Environmental Type Tests Test Description Test Levels Severity Levels IEC 60068-2-6 Vibration 2 g @ 10-150 Hz Class 2 IEC 60068-2-27 Shock 30 g @ 11 ms Class 2 RUGGEDCOM RP110 Installation Manual, 01/2021, C79000-G8976-1012-04...
- Page 40 Further Information Siemens RUGGEDCOM https://www.siemens.com/ruggedcom Industry Online Support (service and support) https://support.industry.siemens.com Industry Mall https://mall.industry.siemens.com Siemens AG Digital Industry Process Automation Postfach 48 48 90026 NÜRNBERG GERMANY...