1 Menu Choosing - Xtool PS2 Heavy Duty Manual

PS2 Heavy Duty
① The power should reach to the normal working voltage, 12 V or 24 V
② the hand should pinch the front of harness to Pull or insert the testing wire, cant pull the
middle part forcibly. Please check if it is flat after inserting, cant slant to insert so as to invoice
destroying the terminals.
③ The user should operate by the illustration as testing special function. For example, the
factors of Off‐cylinder test for some vehicles are as follows: the water temperature of engine is
80℃ ‐105℃， should close light， air condition and loosen pedal fast etc.
④ as the diesel machine and the electronic control system are usually complex, so if it cant
test or testing data is wrong, please check out the correct ECU model，then choose it to
correspond with the menu
⑤ Maybe it should update the software If you cant find out the vehicle model or diesel
electronic control system in the menu. Or contact with technical service department.
⑥No using the harness not produced by xtooltech in order to avoid unnecessary loss.
⑦No plugging out SD card in terms of diagnostic testing in order to avoid losing data.
⑧No power off directly in terms of communication with PS2 and vehicle, please cancel the task
first, then back to main interface, and then power it off.
⑨ Please using it gently and no shaking and striking. Please touching screen gently so that it
can be used as long as possible.
⑩ please power it off if long time no use it.
F. Using method and functions
1、Menu choosing
⑴ As connecting PS2 with vehicle successfully, Press down power key, enter into the main menu ,
shown as follows▼
14