D, Install Printing Paper - Xtool PS2 Heavy Duty Manual

PS2 Heavy Duty
D. To install Printing paper
1, Notes
① The standard of printing paper is Φ 30mm X 57mm and inner hole isΦ 10mm for thermal
paper
② Thermal paper must be put far away from high‐temperature place, or it could lead to
abnormal showing, fuzzy‐printing or black‐stone on the printer paper.
③ It cant be print out normally if the paper Installed negatively
2、installation for printing papaer
①Take the printer cover off from the
mainframe‐back, hold down the printer
cover to push back toward the direction of
the arrow to open, as shown below▼
③ Stretch out some typing paper, and ensure
that the edge of typing paper is on a parallel
with printing box, then push back the cover as
shown below▼
② take out the printer‐roller, install the
printing paper positively, then plug the roller
into the inner hole, as shown below
▼
④it can print after the cover is installed , if
paper cant print smoothly, please check if
paper installed unfit; if it cant print out words,
please check if paper installed negatively▼
12