Koyker FLEXSTOR 1055 Owner's Manual page 27

WARNING: Make sure the area is clear of
personnel and objects before
removing the plastic.
6. Use the "Bag Removal" valve to extend
the cylinders to remove the plastic.
7. Retract the spool push cylinders
completely.
SECTION 4 - OPERATION
Bag Removal Valve
8. Install the inner spool plate back onto the
spools and insert the two pin clips.
9. Install the outer spool plate and close the
spool door.
10. Insert the bushing spacer. Install and
tighten the securing bolt, lock washer and
flat washer.
11. Repeat steps 8-11 for the opposite side.
4-16