Koyker FLEXSTOR 1055 Owner's Manual page 22

Joins the bottom
part at the Vertical
Frame Guide Roller
b) The top plastic goes above the
Gathering Augers and meets up
with the bottom part at the Frame
Guide Roller.
c) The outer sides run on the inside
of the Bag Lift Roller Wing post,
on the inside of the Outer Vertical
Frame Guide Roller and connect
to the Spools.
Outside the Inside
Front Vertical
Frame Guide Roller
Outside the Inside
Rear Vertical
Frame Guide Roller
d) The cut edges run on the outside
of the Inside Rear and Inside
Front Vertical Frame Guide
Rollers.
SECTION 4 - OPERATION
Above the
Gathering
Augers
Inside the
Outer Verti-
cal Frame
Guide Roller
Inside the
Bag Lift
Roller Wing
post
4-11
3. Connect the plastic to the spools by
inserting a small piece through the front
side of the "wedge".
4. Looping it back through to the back side
and pull tight.