Koyker FLEXSTOR 1055 Owner's Manual page 17

NOTE: Use the "Rear Roller" valve on the
operators station.
Remove Pins on Both Ends
b) Remove the pin clips on both ends
of the pin.
c) Adjust the pin into the appropriate
position hole.
SECTION 4 - OPERATION
Rear Roller Valve
d Install the pin clips onto both ends
of the pin.
Rest Conveyor on
position pin
e Lower the Bag Lift Roller until
the conveyor rests on the pin.
Snout Rubber
Opens to this
side if un-
loading on
Drivers side
16. Decide which side to unload on and rotate
the snout to the correct orientation. The
rubber on the snout will open towards the
same side as the truck auger will be on.
4-6
Remove Pins
Snout Rubber
Opens to this
side if un-
loading on
passenger
side