NOTE: Oil is only permitted to flow in one
direction, so activate the circuit and
check for hydraulic flow.
Continuous flow needs to be
maintained for the GBU to operate.
Select a hydraulic circuit that is
capable of being locked for
continuous flow.
12. Unfold the Bag Lift Roller wings.
a) Remove the pin clip and pin.
b) Lower the Bag Lift Roller wing to
the operation position.
c) Insert pin and pin clip.
d) Repeat procedure for the other
side.
SECTION 4 - OPERATION
Remove Pins
Install Pins
13. Unfold the Gathering Auger
Extensions.
Operation Position
a) Unfold gathering auger cage and
auger to the operation position.
NOTE: Make sure the auger is
Remove Latch Pin and Clip
b) Remove latch pin clip and pin.
4-4
engaged properly with the
drive.