Koyker FLEXSTOR 1055 Owner's Manual page 14

Cat II
Cat III Quick Attach
Cat II Quick Attach
NOTE: There are three holes for the top link
pin. Use the appropriate hole for the
type of Cat and
For use on Cat III hitches, bushings
are needed the lower link arms along
with a new top link pin. Both these
items are not supplied with the GBU.
See dealer for parts.
When using a Quick Attach 3 pt
Hitch, the front of the GBU may
need to be raised or lowered to align
it with the tractor.
8. Adjust the tractor 3 pt top link so the
GBU is level from front to back.
9. Turn both implement jacks to Transport
position.
10. Connect the PTO drive shaft.
Remove Pins
a) Remove the PTO bracket pins.
b) Lift the securing plates up.
SECTION 4 - OPERATION
method.
Lift Securing Plates
c Remove the PTO Shaft from the
transport storage brackets and
connect it to the GBU.
d Connect the other end of the PTO
to the tractor.
NOTE: The tractor PTO needs to be a
Install Pins
e) Lower the securing plates.
f) Align the holes and install the
pins.
11. Connect the two hydraulic hoses to the
tractor.
4-3
Connect PTO to the GBU
540 rpm, 1 3/8" 6 splined.
Replace Securing Plates
Connect Hydraulic
Hoses To The
Tractor