Host Computer Configuration (Used In Sta Mode) - Ebyte NA611-S User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.

2.5. Host computer configuration (used in STA mode)

1. Select the corresponding serial port, and configure the baud rate parameters correctly, the factory default baud
rate is 115200, 8 data bits, 1 stop bit, no parity bit (NONE);
2. Click to enter the configuration and read the parameters to obtain the current configuration parameters of the
device;
Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co.,Ltd.
页
NA611-S & NA611-SA User Manual
第 16