Chengdu Ebyte Electronic Technology Co., Ltd.
7.2 Configuration mode (mode 2)
Type
Transmitting
Receiving
Configuration
8. Register read and write control
8.1 Command format
In configuration mode(mode 2:M1=OFF,M0=ON),supported commands are as follows(only 9600,8N1 are
available):
Command
NO
format
Configure
1
register
Read
2
register
Configure
3
temporary
register
ChengduEbyteElectronicTechnologyCo,;Ltd
Copyright2012–20231
14
When M0 = ON and M1 = ON, the module works in mode 2.
Users can visit register to configure the working status.
command:C0+start address+length+parameter
Reply:C1+start address+length+parameter
Example 1:set channel as 0x09
command start address
Transmit:C0
Return:C1
05
Example 2 : set module address ( 0x1234),network address (0x00),UART(9600
8N1),air data rate(1.2K)
Transmit:C0 00 04 12 34 00 61
Return:C1 00 04 12 34 00 61
Command:C1+start address+length
Reply:C1+start address+length+parameter
Example 1: read channel
command start address
Transmit:C1
Return:C1
05
Example 2: read module address, network address, UART and air data rate
Transmit:C1 00 04
Return:C1 00 04 12 34 00 61
Command:C2 +start address+length+parameter
Reply:C1 +start address+length+parameter
Example 1:Set channel as 0x09
command start address
Wireless transmission is off.
Wireless receiving is off.
Description
length
05
01
09
01
09
length
05
01
01
09
length
E90-DTU SL User Manual
parameter
parameter
parameter