Ebyte NA611-S User Manual page 28

Chengdu Ebyte Electronic Technology Co.,Ltd.
filled in the device secret column.
Then check the subscribe/publish option below, fill in the topic of subscription and publishing, select your
item in the product column, click View, and then find the content you want to subscribe and publish in the Topic
category list and fill it in.
Simple configuration of the device
1. Select the corresponding serial port and configure the baud rate parameters correctly. The factory default baud
rate is 115200, 8 data bits, 1 stop bit, and no parity bit (NONE);
2. Select the working mode of the device, the factory default AP mode, the following tests are carried out with
the factory parameters, if the factory parameters are not, it is recommended to restore the factory (after the
device enters the configuration according to the previous three steps and connects with the host computer,
click on the upper right to restore the factory settings) and then carry out;
3. Configure the SSID of the device (factory default: NA611-S) and Password (factory default: 88888888), here
do not modify the parameters that only query WiFi;
Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co.,Ltd.
页
NA611-S & NA611-SA User Manual
第 28