Sta Mode Communication Test - Ebyte NA611-S User Manual

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

Configure the link parameters, the factory default is server mode (TCPS), the IP is dynamically obtained by

the device, here is 192.168.10.152, and the local port is modified to 8888;

Click Save to restart the device;

2.6. STA mode communication test

Keep the computer and the device connected to the same router (the connection is successful and LINKA is

always on), the computer uses a dynamic IP (for the configuration method, refer to 2.4 AP mode communication

test), open the network assistant, and connect to the device server (192.168.10.152:8888, obtain the IP according to

the actual device) If the connection is successful, LINKB is always on), if you cannot connect according to the

above configuration, it is recommended to turn off the computer firewall;

The communication test uses the serial assistant to send "EBYTE_NA6111_S_TEST_UART", the network

assistant

receives

页

"EBYTE_NA6111_S_TEST_UART",

NA611-S & NA611-SA User Manual

the

network

assistant

sends

第 18

Table of Contents

Na611-sa