Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co.,Ltd.
2.
Use the SSID obtained from the computer connection query, here is NA611-S, enter the wifi password, and
connect the device (the device LINKA is always on when the connection is successful);
3.
Through the host computer configuration, open link 1, open the TCPS mode, the default (192.168.1.1, 8888
port), save the parameters and exit the configuration, LINKB is always on.
4.
Open the network assistant and connect to the device server (192.168.1.1:8888). If you cannot connect
according to the above configuration, it is recommended to turn off the computer firewall;
5.
The communication test uses the serial assistant to send "EBYTE_NA6111_S_TEST_UART", the network
assistant
receives
"EBYTE_NA6111_S_TEST_NET", and the serial assistant receives "EBYTE_NA6111_S_TEST_NET";
Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co.,Ltd.
页
"EBYTE_NA6111_S_TEST_UART",
NA611-S & NA611-SA User Manual
the
network
assistant
sends
第 15
Advertisement
Table of Contents
