Ebyte NA611-S User Manual page 13

Chengdu Ebyte Electronic Technology Co.,Ltd.
Fill the above mqttHostUrl into the above address bar and post in the above port bar. However, the above three
columns such as clientID are ignored, because this is a packaged parameter, and our device will automatically
package it for you, so fill in the following content in the three columns of product key, device name, and device key,
and fill in the product to the device Name column, Productkey is filled in the product key column, DeviceSecret is
filled in the device secret column.
Then check the subscribe/publish option below, fill in the topic of subscription and publishing, select your
item in the product column, click View, and then find the content you want to subscribe and publish in the Topic
category list and fill it in.
Simple configuration of the device
1. Select the corresponding serial port and configure the baud rate parameters correctly. The factory default baud
rate is 115200, 8 data bits, 1 stop bit, and no parity bit (NONE);
Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co.,Ltd.
页
NA611-S & NA611-SA User Manual
第 13