Host Computer; Connect And Control - Ebyte M31 Series User Manual

Chengdu Ebyte Electronic Technology Co., Ltd. Distributed IO Host (M31 Series) User Manual

5. Host computer

5.1. Connect and control

1. Host computer connection equipment
（1）You can configure the device by selecting the interface (serial port/network port); if you select the network
port, you must first select the network card and then search for the device.
(2) If you select a serial port, you must select the corresponding serial port number, the same baud rate, data bits,
stop bits, parity bits and address segment search range as the device, and then search.
Copyright © 2012 , Chengdu Ebyte Electronic Technology Co., Ltd.
36