NB183S&NB183_User Manual Disclaimer EBYTE reserves all rights to this document and the information contained herein. Products, names, logos and designs described herein may in whole or in part be subject to intellectual property rights. Reproduction, use, modification or disclosure to third parties of this document or any part thereof without the express permission of EBYTE is strictly prohibited.
NB183S&NB183_User Manual 1. Overview The serial server series products independently developed by Ebyte integrate the TCP/IP protocol stack, which can realize two-way transparent transmission of data from serial port to Ethernet port, Modbus protocol conversion, serial port device cloud and other functions. The industrial design ensures the stability of the equipment in the harsh working environment, and the rich indicator light effects are used to feedback the different working states of the equipment.
Support firmware upgrade or firmware replacement by the host computer through UDP or serial port; The isolated version supports 8-channel serial port independent hardware isolation(Supported only on NB183) 2. Quick Start 2.1 Hardware Preparation One notebook with RJ45 network port;...
In order to enable users to quickly have a simple understanding of the serial port server, we use the default parameters of the serial port server to conduct data transparent transmission test. The default parameters of the NB183 serial server device are shown in the table below.
4. Basic Functions 4.1 Correspondence between channel and serial port Baud rate: 2400, 4800, 9600, 14400, 19200, 38400, 57600, 76800, 115200bps; Data bits: only 8 bits are supported; Check digit: support no check (NONE), odd check (ODD), even check (EVEN); Hardware flow control: not supported Channel Serial Port...
Step 1: Make sure the device is powered off and connect serial port 1 correctly; Step 2: Open "Ebyte Network Configuration Tool", select "Serial Port Upgrade Assistant" under the "Menu" option, select the corresponding serial port and click "Open Serial Port";...
Page 34
(www.ebyte.com). The demo firmware is not provided on the official website; Step 4: Click "Start Upgrade", press and hold Reload of NB183 and then power on the device, wait for the firmware upgrade to complete, click "Cancel" to end the serial port upgrade;...
About us Technical support: support@cdebyte.com Documents and RF Setting download link::https://www.cdebyte.com Thank you for using Ebyte products! Please contact us with any questions or suggestions: info@cdebyte.com ------------------------------------------------------------------------------------------------- Official hotline: 028-61399028 ext. 821 Web:https://www.cdebyte.com Address: B5 Mould Park, 199# Xiqu Ave, High-tech District, Sichuan, China...