Ap Mode Communication Test - Ebyte NA611-S User Manual

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

Select the working mode of the device, the factory default AP mode, the following tests are carried out with

the factory parameters, if the factory parameters are not, it is recommended to restore the factory (after the

device enters the configuration according to the previous three steps and connects with the host computer,

click on the upper right to restore the factory settings) and then carry out;

Configure the SSID of the device (factory default: NA611-S) and Password (factory default: 88888888), here

do not modify the parameters that only query WiFi;

Configure the link parameters, the factory default is server mode (TCPS), the default IP (192.168.1.1), and the

port is 8888;

Turn off other advanced modes, the factory default is turned off.

2.4. AP mode communication test

Configure the computer Ethernet in the following ways, modify IPv4 to obtain IP automatically and obtain

DNS server address automatically;

页

NA611-S & NA611-SA User Manual

第 14

Table of Contents

Na611-sa