Stiga G 300 Instruction Manual page 56

PROBLEM
"Lifted Robot" appears
on the App
"Wheel error" appears
on the app.
The app displays "Tall
Grass" or "Mowing
Error".
The App displays
"Tipping".
52
7. TROUBLESHOOTING
CAUSES
The robot lawn mower is lifted
from the ground.
Uneven ground or with obstacles
stopping the movement.
One or both motors working the
wheel drive have failed
Blocked or damaged cutting disc.
Pivoting cutting blades worn
or blocked by encrustations or
residues.
The robot lawn mower was started
in the presence of unexpected
obstacles (fallen branches,
forgotten objects, etc.).
Electric motor failure
Grass too tall
The robot lawn mower is on a
slope that is higher than the
allowed limits.
SOLUTIONS
Check that the robot lawn mower is not
blocked or obstructed by any objects.
Clean and remove any grass residues
under the hood that may obstruct the
sensors (See Par. 6.2).
Check that the lawn to be mowed is
uniform with no holes, stones or other
obstacles.
Otherwise, proceed with any necessary
site clearance work ( See Par. 4.3).
Replace the motor, contact the nearest
authorized service centre.
Stop the robot lawn mower in safety
conditions (See Par. 2.3) Release the
cutting disc from objects that cause it to
block or replace the cutting disc with a
new one (See ). 6.3).
Stop the robot lawn mower in safety
conditions (See Par. 2.3). Release and
clean or replace the cutting blades (See
Par. 6.3).
Stop the robot lawn mower in safety
conditions (See Par. 2.3). Remove the
obstacles and restart the robot lawn
mower.
Replace the motor, contact the nearest
authorized service centre.
Increase the cutting height (See Par. 5.6).
Make a perimeter cut.
Exclude the area with the slope beyond
the allowed limits by delimiting it (See
Par. 4.3)
EN