Stiga G 300 Instruction Manual page 36

4.7.4. DEVICE PAGE
The "Device Page" section allows the user to check the robot lawn mower's status, to start it up for work or
to force its return to the docking station.
1. Press the "start" button to start the robot lawn mower.
2. Press the "stop" button to stop the robot lawn mower.
3. Press on the "return to base" button to force the robot lawn mower to return to base.
4. Press on the "closed area" button to start the robot lawn mower working in an area that it cannot
reach independently. (See Par. 4.7.5).
4.7.5. CLOSED AREA
NOTE: Check the availability of this function on the STIGA.GO App.
The "Closed Area" section allows to start the robot lawn mower in an enclosed area normally excluded
from the work area because it is not reachable, but in any case delimited by the perimeter cable. (See
Par. 4.4.3).
1. Press the dedicated button to choose the "Closed Area" mode.
2. Place the robot lawn mower inside the closed area and follow the guided procedure.
NOTE: The user can select whether to have the robot lawn mower work for the full duration of the
battery life or for a shorter time set manually.
4.7.6. SETTINGS
The "Settings " section provides access to the robot lawn mower's settings screen.
1. Press the "settings" button to enter Settings mode.
2. Select the function to be set-up.
4.7.7. SPOT CUT / SCHEDULED
The "Spot Cut / Scheduled" selector allows the user to activate or deactivate the programmed work
schedule.
The number of weekly hours to schedule are suggested by the app according to the size of the garden.
1. If set to "Scheduled" the robot lawn mower works according to the scheduled work program.
2. If set to "Spot Cut" the robot lawn mower works in a single work cycle.
4.7.8. MOWING SESSIONS
The "Mowing sessions " section allows you to program the time and working days of the robot lawn mower.
The number of weekly hours to schedule are suggested by the app according to the size of the garden.
1. Press on the "spot cut/scheduled" selector switch to enter the working hours set up menu and select
a day of the week.
2. Press the "add cutting time" button to add a new work schedule.
3. Enter the work start and end times then confirm.
4. The user has the option of applying the same working hours to several days of the week.
5. The working time will be displayed on its scheduled weekday. By pressing on each working time it is
possible to copy or delete it.
NOTE: The built-in clock of the robot lawn mower is automatically synchronised with the time on
the mobile device whenever the robot is connected to the App via Bluetooth.
32
4. INSTALLATION
EN