Docking Station Installation - Stiga G 300 Instruction Manual

4.5.3. INSTALLATION OF THE DOCKING STATION
CAUTION:
Danger of cutting hands.
ELECTRICAL HAZARD:
Connect the power supply only at the end of
all the installation operations. If necessary
during the installation, turn off the general
power supply.
Requirements and obligations:
• Flat land
• Docking station
• Power supply
• Screwdriver
• Electrician's scissors
• Glasses
GLOVES OBLIGATION:
Use protective gloves to avoid
cutting your hands.
The docking station can be installed:
• aligned with the perimeter cable so that the robot can access it by navigating the perimeter cable
clockwise.
Procedure:
1. Check the installation requirements as indicated in par. 4.3.
2. If necessary, prepare the ground so that the surface of the docking station (A) is at the same level
as the lawn (B), the ground must be perfectly fl at and compact in order to avoid deformation of the
surface of the docking station.
26
4. INSTALLATION
• Compact soil
• Perimeter cable
• Fixing pegs
• Hammer
• Gloves
GLASSES OBLIGATION:
Use safety glasses to avoid the
danger of dust in the eyes.
A
B
CAUTION:
Danger of dust in
the eyes.
EN