Stiga G 300 Instruction Manual page 20

WARNING:
The power cable (C), power supply unit, extension cord and all other electric
cables which do not belong to the product must remain outside the cutting area
to maintain their distance from hazardous moving parts and prevent damage to
cables which may come into contact with live parts.
3. Make sure that the area chosen for installing the docking station (D) is at least 400 cm away from the
docking station (E) of a possible second robot lawn mower.
WARNING:
The excessive proximity between two docking stations could cause interference
(See Par. 4.7.14)
4. Prepare the installation area of the power supply unit (B) so that it is protected from solar radiation
and in order to prevent it from being submerged in water at any time.
NOTE: It is preferable and recommended to install the power supply (B) in a closed
compartment protected from atmospheric agents, in a position that is not easily accessible by
unauthorized persons such as children (X> 160 cm).
16
4. INSTALLATION
D
B
x
E
EN