Stiga G 300 Instruction Manual page 31

3. Remove the cover (C).
4. Position the docking station:
• Aligned to the perimeter cable (D2) so that the robot is able to access it by navigating the
perimeter cable in a clockwise direction.
5. Insert the two ends of the cable into the appropriate slots (E2).
6. Cut the ends of the cables to the exact length.
7. Apply the self-drilling connectors on the cable (F), (G), (H).
8. Connect the connectors to the terminals (I).
EN
D2
F
I
E2 E2
G
H
4. INSTALLATION
27