Stiga G 300 Instruction Manual page 37

4.7.9. GO-TO CUT POINTS
NOTE: Check the availability of this function on the STIGA.GO App.
The "Go-To-Cut Points" section allows you to set one or more starting points for the robot lawn mower's
work in order to improve coverage in the different areas of the garden (see Par. 4.4). The number of
settable start points depends on the model of the robot lawn mower.
The work start points are defined using the following parameters:
• Distance from the starting point to the docking station measured along the perimeter wire.
• Direction to reach the work point (clockwise or anticlockwise).
• The frequency at which the work point is reached expressed as a % of the total working time
scheduled weekly.
4.7.10. BORDER CUT
The "Border cut" section allows to program the border cutting of the garden on a certain day.
1. Choose the days in which to perform the border cut.
2. Press the dedicated button to enable the function.
NOTE: The border cut can be activated only for the days of the week in which the robot lawn
mower has been scheduled to work.
4.7.11. ECO MODE
NOTE: Check the availability of this function on the STIGA.GO App.
The 'Eco mode' function allows the user to set a low-energy mode by proportionally reducing the working
time of the robot lawn mower compared to the time programmed by the user.
NOTE: It is advisable to use this function at times of the year when the grass grows more slowly.
4.7.12. RAIN SENSOR (DEPENDING ON THE MODEL)
The "Rain sensor" function allows you to enable or disable the rain sensor on the robot lawn mower.
1. Press the dedicated button to enable the function.
2. Select one of the three available rain sensor sensitivity levels.
4.7.13. APP LOCK
In order to prevent the robot lawn mower from being used by children or unauthorised persons, the keypad
can be locked. This will allow the robot lawn mower to be controlled solely via the App.
Procedure:
1. Activate or deactivate the Keypad/App Lock function from the app's 'settings' menu
NOTE: When the function is active, the keypad lock remains active even if the robot lawn mower
is switched off.
EN
4. INSTALLATION
33