Final Fitting; Customer Care - Falcon Classic User's Manual & Installation Instructions

Final Fitting

Fitting the 1-piece Plinth
Loosen the three screws along the front bottom edge of the
cooker. Hook the central keyhole over the central screw. Twist
and fit each end keyhole over their respective screws. Tighten
the fixing screws (Fig. 9.13).
Fitting the 2-piece Plinth (Classic and Infusion)
Fit the inner plinth to the bottom front of the cooker using
the 4 screws provided (Fig. 9.14).
Fit the outer plinth (2 screws, 1 each end) to the inner plinth.
The height of the outer plinth can be adjusted by sliding it up
or down via the slotted hole (Fig. 9.15).

Customer Care

INSTALLER: Please complete your details in this guide,
inform the user how to operate the cooker and hand over the
instructions.
Thank you.
Check the appliance is electrically safe when you have finished.
(Professional+)
INSTALLATION
ArtNo.350-0010 - Fitting the plinth 1 (Kitchener)
ArtNo.350-0011 - Fitting the plinth 2 (Kitchener)
Inner plinth
Inner plinth
33
Outer plinth
Outer plinth
Outer plinth fixing screw
Outer plinth xing screw
Fig. 9.13
Fig. 9.14
Fig. 9.15