Final Fitting; Customer Care - Falcon Classic User's Manual & Installation Instructions

Fig.7-10
ArtNo.215-0026 - Handle gaskets fixed
Fig.7-11
Art No 215-0028 - Handrail fascia fixings
Fig.7-12
ArtNo.350-0012 - Securing the plinth
Fig.7-13
ArtNo.350-0010 - Fitting the plinth 1 (Kitchener)
Fig.7-14
ArtNo.350-0011 - Fitting the plinth 2 (Kitchener)
Outer plinth xing screw
Inner plinth
Fig.7-15
Check the appliance is electrically safe when you have finished.
Outer plinth
INSTALLATION

Final Fitting

Fitting the Handles and Handrail
Deluxe)
Remove the 4 mm Allen screws from the doors (Fig.7-10). Fit
the door handles and secure using the 4 mm screws.
The handles should be above the fixings.
n n
Remove the 4 mm Allen screws from the top corners of the
fascia (Fig.7-11). Fit the front handrail in position and secure
using the 4 mm screws.
Fitting the 1-piece Plinth
Loosen the 3 screws along the front bottom edge of the
cooker. Hook the central keyhole over the central screw. Twist
and fit each end keyhole over their respective screws. Tighten
the fixing screws (Fig.7-12).
Fitting the 2-piece Plinth
Fit the inner plinth to the bottom front of the cooker using
the 4 or 5 screws provided (Fig.7-13).
Fit the outer plinth (2 screws, 1 each end) to the inner plinth.
The height of the outer plinth can be adjusted by sliding it up
or down via the slotted hole (Fig.7-14).
Hi-LITE: Offer the keyhole slots on the outer plinth to the
location points on the inner plinth (Fig.7-15)
When released the outer plinth should automatically adjust
to the floor height (Fig.7-15).
WARNING: When moving the cooker ensure that the
n n
outer plinth is removed. Failure to do so may result
in damage to plinth and floor.
Fitting the Splashback
Position the splashback on the rear of the hotplate and secure
with the screws supplied.

Customer Care

Installer: Please complete your details in this guide, inform
the user how to operate the cooker and hand over the
instructions.
Thank you.
30
(Classic & Classic
(Classic & Professional+)
(Classic Deluxe)