Advertisement
ASSEMBLY INSTRUCTION
EMMA BED
ASSEMBLY RATING
The Assembly Rating is a 5-point
system that shows the degree of effort
needed in assembling a specific
product (with 1 being easy and 5 being
difficult).
For most products, two
persons are recommended.
EASY
DIFFICULT
PRODUCT CODE: HOBED00024
Requirement for Assembly
2 PERSONS RECOMMENDED
2 PERSONS RECOMMENDED
1/6
Advertisement
Table of Contents
Related Manuals for Furn Mill HOBED00024
Summary of Contents for Furn Mill HOBED00024
- Page 1 ASSEMBLY INSTRUCTION EMMA BED PRODUCT CODE: HOBED00024 Requirement for Assembly ASSEMBLY RATING The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product (with 1 being easy and 5 being difficult). For most products, two persons are recommended.
- Page 2 HARDWARE DETAIL ASSEMBLED PRODUCT HARDWARE QTY. Screw 3.5x16mm Screw 3.5x25mm Screws 4x35mm Screws 4x40mm Bed Clamp 150mm...
- Page 3 STEP 01 Fix the Part ‐ A, Part ‐ C and Part ‐ F with bed clamp of 150mm using screws of 16mm with the help of screw driver at position A1,A2,A3 and A4 as shown in Fig. STEP 02 U-batten Place the Part ‐D in between U-batten at postion B1 and B2 respectively as shown in fig.
- Page 4 STEP 03 Fix the Part ‐B(Leg) using screw of 35 mm at position C1,C2,C3&C4.Also fix Part ‐E at position D1 & D2 using screw of 40mm with the help of screw driver at position D1 and D2 diagonally as shown in Fig.
- Page 5 Screws 3.5 x 25 mm STEP 04 Place the PART-G(strips) on last assembled part and fix all strips with screws as shown in the Fig. Your bed is ready...
- Page 6 Thank you for your purchase! We hope you will enjoy your new product for many years to come. Our commitment to providing quality products does not simply end when a purchase is made. We stand behind our products and will provide any support needed in order for you to fully enjoy your purchase.
Need help?
Do you have a question about the HOBED00024 and is the answer not in the manual?
Questions and answers