Table of Contents
Advertisement
Installation guidelines
•
As shown in
•
The installation positions of the switch modules and Mezz NICs must satisfy internal connection
relationships. For details, see
•
Six switch module slots can be divided into three pairs, corresponding to three switching planes.
Where, slots 1 and 4, slots 2 and 5, and slots 3 and 6 function as the active and standby slots of
three switching planes.
•
The switch module is hot swappable.
Figure 6 Guidelines for installing the switch module
(1) ICM1 slot
(4) ICM4 slot
Figure
6, up to six switch modules can be installed in the blade enclosure.
Table 5Figure 7
(2) ICM2 slot
(5) ICM5 slot
and
Table 5Figure
8
8.
(3) ICM3 slot
(6) ICM6 slot
Advertisement
Table of Contents
