Safety; Checklist - ABB ACS580MV Quick Manual

34 Installation checklist

Safety

DANGER
High voltage!
Obey the instructions in chapter
death, or damage to the equipment can occur.
Before starting to work on the drive, make sure:
•
that the main and auxiliary power supply to the drive is switched off, locked
out, and tagged out
•
that the drive is dead
•
that safety ground connections are in place
•
that personal protective equipment is provided and used when required
•
that everyone involved is informed.
Before energizing the drive, make sure:
•
that all foreign objects are removed from the drive
•
that all internal and external covers are securely fastened and all doors are
closed, locked and / or bolted
•
that the release dials of safety switches are in the locked position.
WARNING
Obey the instructions in chapter
injury or death, or damage to the equipment can occur.
NOTICE! The field engineer should confirm that the power cables are connected to
the correct busbar before switching on the main power. Otherwise, the power
modules would be irreversible damaged.

Checklist

Do the steps in section
work. Go through the checklist together with another person.
instructions. If you ignore them, injury or
Safety
General safety information
instructions. If you ignore them,
Safety
on page 8, before you start the