ABB ACS580MV Quick Manual page 25

Connect the cables to their corresponding busbars. Use cable lugs suitable for M12
bolts. The required tightening torque is 40 Nm.
•
Feeder cables to busbars U1, V1, W1
•
Motor cables to busbars U2, V2, W2
•
Screen ends of all conductors and the shields of all cables to the PE or FE
ground busbar
•
Ground cable to the PE ground busbar
1
2
3
4
Terminal compartment with cover plate removed, view from front.
Voltage dividers
Motor side terminals
Input terminals
Cable entry plate (bottom plate)
Electrical installation 25
1
2
3
4